Amana LWA90AL Washer Manual

The Amana LWA90AL is a top-load washing machine designed for efficiency and ease of use. It features a variety of wash cycles, including normal, delicate, and heavy-duty, to accommodate different fabric types. With a capacity of 3.5 cubic feet, this washer can handle large loads while maintaining water and energy efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-load design, multiple wash cycles, adjustable water levels, and a durable stainless steel tub.

Feature	Description
Multiple Wash Cycles	Normal, Delicate, Heavy-Duty, and more for various fabric types.
Adjustable Water Levels	Customize water usage based on load size.
Stainless Steel Tub	Durable and resistant to chipping and rust.
End-of-Cycle Signal	Alerts when the wash cycle is complete.
Lint Filter	Helps to trap lint and debris during washing.

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect the water supply hoses to the hot and cold water faucets.
Attach the drain hose to the drain outlet.
Plug the washer into a grounded electrical outlet.
Ensure all connections are secure and leak-free.

WARNING! Ensure the washer is level to avoid vibrations during operation.

First-Time Setup

Power on the washer; follow the on-screen prompts.

Select your preferred wash cycle using the control panel.
Adjust water temperature settings as needed.
Load laundry into the drum, ensuring not to overload.
Press the start button to begin the wash cycle.

CAUTION! Do not exceed the maximum load capacity.

Specifications

Capacity: 3.5 cubic feet.
Wash Cycles: Normal, Delicate, Heavy-Duty, and more.
Water Temperature Settings: Hot, Warm, Cold.
Spin Speed: Adjustable spin speed settings.
Dimensions: 27 inches wide, 42 inches high, 27 inches deep.
Power Source: 120V AC, 60Hz.
Weight: Approximately 150 lbs.

Controls and Settings

Access the control panel to select wash cycles, water temperature, and spin speed. The panel includes buttons for Start, Pause, and Cancel.

Indicator Lights: Show the status of the wash cycle, including power, cycle in progress, and end-of-cycle.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies.

Turn off both water supply valves before connecting hoses.
Attach hoses securely to prevent leaks.
Turn on the water supply and check for leaks.

Tip: Use Teflon tape on hose threads for a better seal.

Operating the Washer

Load laundry, select wash cycle, and start the machine. Monitor the cycle through the indicator lights.

Press the Start button to begin washing.
Pause the cycle if needed to add items.
Wait for the cycle to complete before unloading.

WARNING! Do not open the lid during the wash cycle.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after every use.
Wipe down the exterior with a damp cloth.
Check hoses for wear and replace if necessary.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked or blocked	Inspect hoses and ensure water supply is on.
Excessive vibrations	Washer not level	Adjust the feet to level the washer.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.
Water leaking	Loose hoses	Tighten hose connections and check for damage.

Reset: Unplug the washer for 5 minutes to reset.

Service: Contact customer support at 1-800-555-0199.